DOUBLE FIRE POWER (GAS) OVEN CLEANING DIP TANK
£1495.00
We have nick named this tank 'The Daddy' because compared to the competition it's undoubtedly a man amongst boys. It's comes with two huge cast iron burners creating a massive combined 16 kw of energy, that's virtually twice as much as anything else on the market. The cleaning solution heats up so quickly it think’s it's in hell!
This massive tank with its high spec is undoubtedly the flagship of our range, it's for professionals who take their job seriously. The tanks generous proportions of 95cm by 60cm means it will comfortably take components from all ovens including Aga's and Ranges, easily accepting shelves of 900mm in length. The tanks is simply mounted as it comes with its own legs welded to the base.
The racks, liners, backplate, grills and glass etc are placed into the boiling solution, in no time the burnt on carbon will be softened so drastically that it either falls off or simply needs wiping away. When the cleaning fluid eventually needs replacing the two 28mm waste gates will empty the tank in record time.
Each 8kw burner has its own ignition system (so there's no need for matches). It also has a thermocouple for added safety. The burners sit in their own tray, this can easily be pulled out from beneath the tank. The trays has air vents so the flames are not starved of oxygen but it also acts as a windshield thereby preventing the flame from going out.
The advantage of this gas tank over an electric one is that you don't need to tap into your customers electricity supply. The tank is infinitely adaptable as you can take it with its gas bottle/s to any location.
JUST LOOK AT THIS TOP CLASS SPEC.
* Made from strong 2mm (304 Grade) top quality stainless steel.
* Tank comes with its own legs and mounting points.
* It will accept components from Aga's and all other large 'Range Ovens' (copes with 900mm racks easily)
* Includes eight adjustable latches to keep the lid down. An additional two latches keep the burner tray securely in place.
* Includes rubber seal meaning the tank can be transported with the cleaning solution in it (No need to empty and waste it between jobs)
* The rubber seal is physically fixed to the sides of the tank. If it was fixed using adhesive then in no time the chemicals and steam within the tank would loosen it.
* Tank incorporates a large quick release 22mm pressure release valve.
* The pressure release valve is fitted higher than on other tanks, this allows you to deep fill the tank.
* The tank has a generous depth of 250mm
* There are two large 28mm gate valves for super fast drainage.
* The tank drains from the bottom and not from the side, this means you'll drain 'all' the solution from the tank not just 'most of it'.
* It has five handles, two on the lid/finishing tray plus two on the tank these help when manoeuvring the tank into position. A fifth handle aids pulling out the burner tray.
* Lid handles are on the top, not at the sides. This means steam from the tank won't scald your hands when the lid is removed.
* Metal handles are clad with red sleeves. This aids grip and reduces the handles temperature.
* Lid of tank can be flipped over and used as a finishing tray. The lid has its own drainage point.
* Solution can be heated up to 100C (plastic tanks only allow heating the solution to 80C meaning they are less effective at removing the carbon build up).
* The burners are fitted with a automatic piezo ignition so there's no need for matches or a lighter.
* Burners incorporate a 'Thermocouple Safety Device' for your reassurance this will cut off the gas supply if the flame is extinguished.
* Burners are suitable for Butane, Propane and LPG gas mixtures. (Please note the Gas Cylinder, Regulator and Hose are not included, this is so you can make your own choice).
* The temperature of the gas burners can be regulated.
* The tank is perfect for bio degradable, non caustic safe oven cleaning solutions.
* The burners and tray can fit neatly into the tank for easy storage and transportation purposes.
* Burner Tray is made from the same 2mm 304 Grade steel as the rest of the tank. It has air vents so the flame is not starved of oxygen, yet provides a windbreak, preventing the flame from being blown out.
* The burner tray easily slides out from beneath the tank, however it can be locked in place using the two latches to prevent it rattling around during transportation etc.
* Tank has been tested.
DIMENSIONS
Tank 95cm (L) 60cm (W) 25cm (H) This excludes handles and legs etc.
Please Note: These Dip Tanks are made of stainless steel and go through a rigorous manufacturing process. During this process it is inevitable that they will pick some small scratches and imperfections. The tanks have also been tried and tested for leaks etc before dispatch. We can often get them to you far quicker than the specified delivery time. If you have any questions then don’t hesitate to contact us.
top of page
£1,495.00Price
bottom of page